Ricoh Aficio MP 2000 General Settings Guide - Page 88
IP-Fax Settings
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Fax Features IP-Fax Settings This section describes the user tools in the IP-Fax Settings menu under Fax Features. Default settings are shown in bold type. Make settings to use IP-Fax. Set H.323 for the gatekeeper, SIP for SIP server, and the gateway to G3 fax if necessary. Check the settings of the network to which this machine is connected before making settings. Make sure you enter these characters correctly: • Numbers 4 • Symbols (# and *) The following characters can be used for registration of the SIP User Name in SIP Settings. Make sure you enter these characters correctly: • Alphanumeric symbols (lower and upper cases) • Symbols Use numbers and periods (".") to enter the correct IPv4 addresses for the gatekeeper, SIP server, and gateway. To obtain the correct IPv4 addresses, consult administrator. ❖ Enable H.323 Specify whether or not H.323 is used for IP-Fax transmission. The default setting is Off. ❖ Enable SIP Specify whether or not SIP is used for IP-Fax transmission. The default setting is Off. ❖ H.323 Settings Set the IPv4 address or host name of the gatekeeper and alias telephone number. To use the gatekeeper, set the parameter setting list (switch 34, bit 1) to "On". A Select [Fax Features] using {U} or {T}, and then press the {OK} key. B Select [IP-Fax Settings] using {U} or {T}, and then press the {OK} key. C Select [H.323 Settings] using {U} or {T}, and then press the {OK} key. D Select [Gatekeeper Address (Main)] using {U} or {T}, and then press the {OK} key. E Enter the IPv4 address or host name of the gatekeeper, and then press the {OK} key. F Select [Own Fax No.] using {U} or {T}, and then press the {OK} key. G Enter Own Fax No and then press the {OK} key. H Press the {User Tools/Counter} key. 80