Ricoh Aficio MP 2000 General Settings Guide - Page 33

Network Settings Settings Required to Use the Network Delivery Scanner This section lists the settings required for delivering data to network. 1 Ethernet This section lists the settings required for delivering data to network with Ethernet cable. For details about how to specify the settings, see "Interface Setting" and "File Transfer". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Setting Requirements Necessary As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network Ethernet Speed Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name File Transfer Delivery Option As required Necessary As required Necessary As required As required As required As required Note ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ If Delivery Option is set to [On], check that IPv4 Address is set. Reference p.47 "Interface Settings" p.53 "File Transfer" 25