Samsung CLP 600N User Manual (ENGLISH) - Page 26
Config Netware, Netware, IPX Frame Type, EN_8022, EN_II, EN_SNAP, select the IPX Frame Type. - reset
UPC - 635753703016
View all Samsung CLP 600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Item WLAN Default Explanation This item performs a simple reset and restores the factory default for the wireless configuration. NOTE: This menu only appears when an optional wired/wireless network interface card has been installed. Netware Config Netware IPX Frame Type Reset Network Default Set Print Net CFG Options: On, Off You can select whether or not to use the Netware protocol. If you select On, you can access the Config Netware menu item. In the Config Netware menu, you can specify the frame type parameter used on your network. Options: Yes, No You can set this item only when you set Netware to On. This item lets you select whether or not you set the frame type parameter. Select Yes to select the frame type. If you select Yes, the IPX Frame Type option appears on the display. Values: Auto, EN_8022, EN_8023, EN_II, EN_SNAP You can select this item only when you set Config Netware to Yes. This item lets you select the IPX Frame Type. • Auto: You can set a frame type automatically. • EN_8022: Select this value to use the IEEE 802.2 frame type. • EN_8023: Select this value to use the IEEE 802.3 frame type. • EN_II: Select this value to use the ETHERNET II frame type. • EN_SNAP: Select this value to use the SNAP frame type. This item reboots the network interface card. This item performs a simple reset and restores the factory default settings for the network configuration. This item prints a page showing the network parameters you have set. 3.6 Using the Control Panel