Samsung CLP 600N User Manual (ENGLISH) - Page 58
On Line, Continue, When the Replace Transfer - smps fan error
UPC - 635753703016
View all Samsung CLP 600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Message Status Do this... Press Continue Button The printer is waiting for the user's action before printing from the Multi-purpose Tray using the manual feed mode. Load a sheet of print material and press the On Line/ Continue button. You need to press the button for each page. Ready [Color] Low Toner The corresponding toner cartridge in your printer is low on toner. Redistribute the toner in the corresponding toner cartridge, referring to page 6.2. Ready IP Conflict The IP address of the printer conflicts with other devices on the network. Contact your network administrator and choose an address within your subnet which will not conflict with any other devices. Rear Fan Error A problem has occurred in the Rear Fan of the printer. Unplug the power cord and plug it in again. If the problem persists, call for service. Replace [Color] Toner The corresponding toner cartridge in your printer is nearly empty. However, the printer continues printing, even though print quality is not optimal. When the '[Color] Toner Empty' message appears, the printer will stop printing. If necessary, replace the corresponding toner cartridge with a new one. See page 6.4. Replace Fuser The life span of the fuser unit has expired and the printer will stop printing until a new fuser unit is placed into the printer. Replace the fuser unit with a new one. See page 6.7. Replace Fuser Soon The life span of the fuser unit will expire soon. When "Replace Fuser" message appears, the printer will stop printing. Replace the fuser unit. Replace MP Pick-roller The life span of the MP pickup roller has expired. Contact a service representative. Replace Transfer Belt The life span of the paper transfer belt has expired and the printer will stop printing until a new paper transfer belt is placed into the printer. Replace the paper transfer belt with a new one. See page 6.5. Message Status Do this... Replace Transfer Belt Soon The life span of the paper transfer belt will expire soon. When the "Replace Transfer Belt" message appears, the printer will stop printing. Replace the paper transfer belt. Replace Tray1 Pick-roller The life span of the Tray1 pickup roller has expired. Contact a service representative. Replace Tray2 Pick-roller The life span of the Tray2 pickup roller has expired. Contact a service representative. SMPS Fan Error A problem has occurred in the SMPS Fan of the printer. Unplug the power cord and plug it in again. If the problem persists, call for service. Tray2 Error The optional Tray2 is not properly installed or connected to the printer. After turn the printer off and then back on, reinstall the optional Tray2. If the message persists, contact a service representative. Tray2 Jam Cover The optional Tray2 jam Close the Tray2 cover firmly. Open cover is open. 7.16 Solving Problems