Samsung ML-2165W/XAA User Manual (user Manual) (ver.1.0) (English) - Page 21
Installing the driver locally - linux
View all Samsung ML-2165W/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installing the driver locally A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine's driver (see Advanced Guide). 3 Select Install Now. • If you are a Macintosh or Linux OS user, refer to the "Software installation" on page 82. • The installation window in this User's Guide may differ depending on the machine and interface in use. • Selecting Custom Installation allows you to choose which programs to install. • Only use a USB cable no longer than 3 meters (118 inches). 12 Windows 1 Make sure that the machine is connected to your computer and powered on. If the "Found New Hardware Wizard" appears during the installation procedure, click Cancel to close the window. 2 Insert the supplied software CD into your CD-ROM drive. The software CD should automatically run and an installation window will appear. 4 Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 5 Follow the instructions in the installation window. 1. Introduction 21