Samsung NE63T8751SS/AA User Manual - Page 23

Surface cooking CAUTION AFTER COOKING • Do not touch the surface units until they have cooled down. • The surface may still be hot and burns may occur if you touch the glass surface before it has cooled down sufficiently. • Immediately clean spills on the cooking area to prevent a tough cleaning chore later. • If cabinet storage is provided directly above the cooking surface, make sure that the items are infrequently used and can be safely stored in an area subjected to heat. Temperatures may be unsafe for items, such as volatile liquids, cleaners, or aerosol sprays. About the radiant surface elements The temperature rises gradually and evenly. As the temperature rises, the radiant element will glow red. To maintain the selected setting, the element will cycle on and off. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle. For efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process. NOTE Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is normal and can occur if the cookware is too small for the radiant element or if the cookware bottom is not flat. NOTE When you operate the knob, beep sounds once. Location of the radiant surface elements and controls The radiant control knobs operate the radiant surface elements on the cooktop as shown below. 01 03 05 02 04 06 01 Left Rear: 6", 1200 W 04 Right Front: 6"/9"/12", 3000 W 02 Left Front: 6"/9", 3600 W 05 Right Rear: 6", 1200 W 03 Warming Center: 100 W 06 Hot surface indicator NOTE The knob illumination around the knob turns on when the knob is turned on. English 23 NE63T8751_AA_DG68-01208A-00_EN+MES+CFR.indb 23 2020-03-27 2:47:40