Samsung NE63T8751SS/AA User Manual - Page 59

Removing and reinstalling the oven door How to remove the door You can remove the upper door the same way you remove the full door. CAUTION • The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle. • Turn the power OFF before removing the door. 1. Open the door completely. 2. Pull the hinge locks down toward the door frame to the unlocked position. Hinge lock How to reinstall the door You can replace the upper door the same way you replace the full door. 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into the bottom of the slot. Bottom edge of slot Hinge arm Locked position Unlocked position 3. Firmly grasp both sides of the door at the top. about 5 ° Indentation 3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot. 4. Push the hinge locks up against the front frame of the oven cavity into the locked position. Hinge lock Maintaining your appliance Fig. 1 Fig. 2 4. Close the door to the door removal position, which is approximately 5 degrees from vertical (Fig. 1). 5. Lift the door up and out until the hinge arm is clear of the slot (Fig. 2). 5. Close the oven door. Unlocked position Locked position NE63T8751_AA_DG68-01208A-00_EN+MES+CFR.indb 59 English 59 2020-03-27 2:47:51