Samsung NE63T8751SS/AA User Manual - Page 53

Set Delay Start, Self Clean

Get Samsung NE63T8751SS/AA PDF manuals and user guides View all Samsung NE63T8751SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Maintaining your appliance Before a self-cleaning cycle • • • Fig. 1 • Don't hand clean the oven door gasket. Fig. 2 You may hand clean • the door. • We recommend venting your kitchen with an open window or using a ventilation fan or hood during the selfcleaning cycle. Remove the wire rack, broil pan, broil pan insert, all cookware, and any aluminum foil from the oven. Wipe up debris from the oven bottom. (Fig. 1) Residue on the front frame of the range and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel-wool pads, or cleansers, such as Soft Scrub. Rinse well with clean water and dry. Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, have it replaced. (Fig. 2) Make sure the oven light bulb cover is in place and the oven light is off. NOTE Remove oven racks and accessories before starting the self-clean mode. How to run a self-cleaning cycle 1. Make sure the oven door is closed completely and unlocked. And turn off all oven and cooktop function. 2. Tap , and select Cleaning > Self Clean using the dial knob. Then, select the cleaning time. (2 hour / 3 hour / 5 hour) 3. Tap START/SET. The oven door is locked automatically and the oven begins to heat up. NOTE • You will not be able to start a self-cleaning cycle if the oven lock feature is activated or if the oven's temperature is too hot. • The oven door locks automatically. The display will show the cleaning time remaining. It is not be possible to open the oven door until the temperature drops to a safe/cool temperature. • The self-cleaning feature will not operate when the warming center is on. 4. When the self-cleaning cycle is done, End will appear in the display and the range will beep several times. How to delay the start of self-cleaning 1. Repeat steps 1 and 2 on 'How to run a self-cleaning cycle'. 2. Select Set Delay Start. 3. Set the time you want the oven to start self-cleaning using the dial knob. 4. Tap START/SET. The oven will start self-cleaning at your specified time. How to turn off the self-cleaning feature You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven. 1. Press OFF. 2. You will be able to open the oven door once the oven has cooled down for approximately 1 hour. NE63T8751_AA_DG68-01208A-00_EN+MES+CFR.indb 53 English 53 2020-03-27 2:47:49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
English 53
Maintaining your appliance
Before a self-cleaning cycle
Fig. 1
Fig. 2
Don’t hand
clean the
oven door
gasket.
You may
hand clean
the door.
•
We recommend venting your kitchen
with an open window or using a
ventilation fan or hood during the self-
cleaning cycle.
•
Remove the wire rack, broil pan, broil
pan insert, all cookware, and any
aluminum foil from the oven.
•
Wipe up debris from the oven bottom.
(Fig. 1)
•
Residue on the front frame of the range
and outside the gasket on the door
will need to be cleaned by hand. Clean
these areas with hot water, soap-filled
steel-wool pads, or cleansers, such as
Soft Scrub. Rinse well with clean water
and dry.
•
Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for
the gasket to remain intact. If you
notice it becoming worn or frayed, have
it replaced. (Fig. 2)
•
Make sure the oven light bulb cover is
in place and the oven light is off.
NOTE
Remove oven racks and accessories before starting the self-clean mode.
How to run a self-cleaning cycle
1.
Make sure the oven door is closed completely and unlocked. And turn off all
oven and cooktop function.
2.
Tap
, and select
Cleaning
>
Self Clean
using the dial knob.
Then, select the cleaning time. (2 hour / 3 hour / 5 hour)
3.
Tap
START/SET
.
The oven door is locked automatically and the oven begins to heat up.
NOTE
•
You will not be able to start a self-cleaning cycle if the oven lock feature
is activated or if the oven’s temperature is too hot.
•
The oven door locks automatically. The display will show the cleaning
time remaining. It is not be possible to open the oven door until the
temperature drops to a safe/cool temperature.
•
The self-cleaning feature will not operate when the warming center is on.
4.
When the self-cleaning cycle is done, End will appear in the display and the
range will beep several times.
How to delay the start of self-cleaning
1.
Repeat steps 1 and 2 on 'How to run a self-cleaning cycle'.
2.
Select
Set Delay Start
.
3.
Set the time you want the oven to start self-cleaning using the dial knob.
4.
Tap
START/SET
.
The oven will start self-cleaning at your specified time.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven.
1.
Press
OFF
.
2.
You will be able to open the oven door once the oven has cooled down for
approximately 1 hour.
NE63T8751_AA_DG68-01208A-00_EN+MES+CFR.indb
53
2020-03-27
°° 2:47:49