Samsung NE63T8751SS/AA User Manual - Page 50
Temp. Unit °F / °C, Cancel/Reset
View all Samsung NE63T8751SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Operating the oven Temp. Unit (°F / °C) Change the temperature format of the oven to Fahrenheit or Centigrade. The default is Fahrenheit. 1. Tap and hold for 3 sec. 2. Select Temp. Unit using the dial knob. 3. Turn the dial knob to select unit and push to save the changes. Calibrate Temp The oven temperature has been calibrated at the factory. When first using the oven, follow the recommended recipe times and temperatures. If it appears that the oven is too hot or too cool, you can recalibrate the oven temperature. Before recalibrating, test a recipe by using a temperature setting that is higher or lower than recommended. The baking results should help you decide how much of an adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C). 1. Tap and hold for 3 sec. 2. Select Calibrate Temp using the dial knob. 3. Turn the dial knob to adjust temperature value. 4. Push the dial knob to save the changes. NOTE This adjustment does not affect the broiling or the self-cleaning temperature, and is retained in memory after a power failure. My Pattern This function remembers and stores the cook settings frequently used by the user. 1. Tap and hold for 3 sec. 2. Select My Pattern using the dial knob. 3. Turn the dial knob to select On/Off and push to save the changes. Default Cavity One cavity will be selected as a default in twin mode when oven turns on. 1. Tap and hold for 3 sec. 2. Select Default Cavity using the dial knob. 3. Turn the dial knob to select Upper or Lower and push to save the changes. Welcome Lighting When you wake up the oven (such as using the dial knob, using the touch pad, open the door), the knob lights blink each to welcome you. Set the Welcome Lighting mode to On/Off. The default is on. 1. Tap and hold for 3 sec. 2. Select Welcome Lighting using the dial knob. 3. Turn the dial knob to select On/Off and push to save the changes. Demo mode This is used by retailers for display purposes only. In this mode, the heating element does not operate. 1. Tap and hold for 3 sec. 2. Select Demo mode using the dial knob. 3. Turn the dial knob to select On/Off and push to save the changes. Reset You can reset your oven setting(More functions, System settings). 1. Tap and hold for 3 sec. 2. Select Reset using the dial knob. 3. Turn the dial knob to select Cancel/Reset. CAUTION Before reset the oven settings, turn off all oven and cooktop functions. Operating the oven 50 English NE63T8751_AA_DG68-01208A-00_EN+MES+CFR.indb 50 2020-03-27 2:47:49