Samsung SCD303 User Manual (user Manual) (English, Twi) - Page 103
Explanation/Solution, Symptom
View all Samsung SCD303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
ENGLISH Troubleshooting ✤ If these instructions do not solve your problem, contact your ✤ nearest Samsung authorized service center. Symptom Explanation/Solution You cannot switch the camcorder on. Check the battery pack or the AC Power Adapter. START/STOP button Check the POWER switch is set to CAMERA. does not operate You have reached the end of the cassette. while recording. Check the record protection tab on the cassette. The camcorder goes off automatically. You have left the camcorder set to STBY for more than 5 minutes without using it. The battery pack is fully exhausted. The battery pack is quickly exhausted. The atmospheric temperature is too low. The battery pack has not been charged fully. The battery pack is completely dead, and cannot be recharged, Use another battery pack. When you see a blue screen during playback. The video heads may be dirty. Clean the head with a cleaning tape. A vertical strip appears The contrast between the subject and the background on the screen when is too great for the camcorder to operate normally. recording a dark Make the background bright to reduce the contrast or background. use the BLC function while you are recording brighter. The image in the viewfinder is blurred. The Viewfinder lens has not been adjusted. Adjust the viewfinder control lever until the indicators displayed on the viewfinder come into sharp focus. Auto focus does not Check the M.FOCUS menu. work. Auto focus does not work in the Manual Focus mode. Play, FF or REW Check the POWER switch. Set the power switch to PLAYER. button does not work. You have reached the beginning or end of the cassette. When you see a broken block image during the RECORD SEARCH. This is normal operation and it is not a failure or defect. 11033