Samsung SCD303 User Manual (user Manual) (English, Twi) - Page 27

Inserting and Ejecting a Cassette - mini dv

Page 27 highlights

ENGLISH Preparation Inserting and Ejecting a Cassette ✤ When inserting a tape or closing a cassette holder, do not apply ✤ excessive force. ✤ This may cause a malfunction. ✤ Do not use any tape other than Mini DV cassettes. 1. Connect a power source and slide the 1 2 TAPE EJECT switch and open the cassette door. - The cassette holding mechanism rises automatically. 2. Insert a tape into the cassette holder with the tape window facing outward and the protection tab bottom. 3 4 3. Press the area marked PUSH on the cassette holding mechanism until it clicks into place. - The cassette is loaded automatically. push 4. Close the cassette door. - Close the door completely until you hear a "click". Note When you have recorded something that you wish to keep, a. SAVE you can protect it so that it will not be accidentally erased. a. Protecting a tape : Push the safety tab on the cassette so that the hole is uncovered. b. Removing the tape protection : If you no longer wish to keep the recording on the cassette, push the safety tab back so that it covers the hole. b. REC • How to store a tape • a. Avoid places with magnets or magnetic interference. b. Avoid humidity and dust prone places. c. Keep the tape in an upright position and avoid storing it in direct sunlight. d. Avoid dropping or knocking your tapes. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

ENGLISH
Preparation
27
27
Inserting and Ejecting a Cassette
When inserting a tape or closing a cassette holder, do not apply
excessive force.
This may cause a malfunction.
Do not use any tape other than Mini DV cassettes.
1.
Connect a power source and slide the
TAPE EJECT switch and open the
cassette door.
-
The cassette holding mechanism rises
automatically.
2.
Insert a tape into the cassette holder with
the tape window facing outward and
the protection tab bottom.
3.
Press the area marked PUSH on the
cassette holding mechanism until
it clicks into place.
-
The cassette is loaded automatically.
4.
Close the cassette door.
-
Close the door completely until you hear a “click”.
Note
When you have recorded something that you wish to keep,
you can protect it so that it will not be accidentally erased.
a.
Protecting a tape :
Push the safety tab on the cassette so that the hole is
uncovered.
b.
Removing the tape protection :
If you no longer wish to keep the recording on the
cassette, push the safety tab back so that it covers the
hole.
How to store a tape
a.
Avoid places with magnets or magnetic interference.
b.
Avoid humidity and dust prone places.
c.
Keep the tape in an upright position and avoid storing it
in direct sunlight.
d.
Avoid dropping or knocking your tapes.
a. SAVE
b. REC
1
3
2
4
push