Sharp MX-M850 Maintenance Manual - Page 15
Finisher For Mx-m850 / Saddle Stitch Finisher
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
REPLACING THE STAPLE CARTRIDGE FINISHER (FOR MX-M850) / SADDLE STITCH FINISHER 1 Open the cover. 4 Release the staple case cover lock. While holding both sides of the staple case, pull up the upper unit. 2 Pull out the unit. Slowly pull out the unit until it stops. When staples remain, the lock cannot be released. 5 Remove the staple cartridge. 3 Remove the staple case. Staple section Grasp the green part of the staple case and pull the staple case down. Saddle stitch section (1) (2) (1) Grasp the green part and pull it forward and down. The unit that holds the staple case will move forward. (2) Pull the staple case up and out. 6 Install a new staple cartridge. Push the staple case in until it clicks into place. Do not remove the seal from the cartridge before inserting the cartridge into the case. In the saddle stitch section, replace the cartridges in the front and back staple cases (two cartridges). 13