Sharp MX-M850 Maintenance Manual - Page 40
Trays 1 to 4
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
REMOVING MISFEEDS X Trays 1 to 4 Before pulling the tray out, be sure to verify that a misfeed has not occurred in the paper conveyor. If you pull the tray out without checking, you may tear misfed paper and make it more difficult to remove the pieces that remain in the machine. ☞ Transport area (page 37) 1 Pull out trays 1 and 2. 5 Pull out tray 3. Gently pull out the tray until it stops. Gently pull out the tray until it stops. 2 Remove the misfed paper. A misfeed has occurred inside the machine. Look inside to check. 6 Lift the unit up off the tray. Place the unit on a level surface. 3 Remove the misfed paper from tray 1. 7 Remove the misfed paper. A misfeed has occurred inside the machine. Look inside to check. (Do not touch the metal frame.) 4 Remove the misfed paper from tray 2. After removing the paper, close trays 1 and 2. 8 Place the unit on the frame. After placing the unit on the frame, close tray 3. 9 Remove the misfeed from tray 4. Follow the same procedure (steps 5 to 8) as for tray 3. 38