Sharp MX-M850 Maintenance Manual - Page 48
Saddle Unit / Finisher For Mx-m850 / Saddle, Stitch Finisher
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
REMOVING A STAPLE JAM 6 Return the lever to its original position. 8 Turn the knob until the unit faces down. 7 Install the staple case. Push the staple case in until it clicks into place. 9 Push in the unit. 10 Close the cover. SADDLE UNIT / FINISHER (FOR MX-M850) / SADDLE STITCH FINISHER To remove or reinsert the staple case, see "SADDLE UNIT" (page 11) or "FINISHER (FOR MX-M850) / SADDLE STITCH FINISHER" (page 13). 1 Lower the lever at the front end of the staple case and remove the jammed staple. Remove the leading staple if it is bent. If bent staples remain, a staple jam will occur again. 2 Return the lever to its original position. 46
46
REMOVING A STAPLE JAM
6
Return the lever to its original position.
7
Install the staple case.
Push the staple case in until it
clicks into place.
8
Turn the knob until the unit faces down.
9
Push in the unit.
10
Close the cover.
SADDLE UNIT / FINISHER (FOR MX-M850) / SADDLE
STITCH FINISHER
To remove or reinsert the staple case, see "SADDLE UNIT" (page 11) or "FINISHER (FOR MX-M850) / SADDLE
STITCH FINISHER" (page 13).
1
Lower the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it
is bent. If bent staples remain, a
staple jam will occur again.
2
Return the lever to its original position.