Sony DCR-HC42 Operating Guide - Page 51
INT.REC-STL, Interval photo recording, DEMO MODE, PRINT, To cancel, touch [REC STOP], then [END].
UPC - 027242669758
View all Sony DCR-HC42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
To interrupt, touch [REC STOP] in step . To resume, touch [REC START]. To cancel, touch [REC STOP], then [END]. • When your camcorder has shot several frames, it records them on the tape, after performing the END SEARCH function depending on the interval length. • Do not turn off the power or disconnect the power source while a message is displayed on the screen. • The camcorder will shoot several frames for the first and last shots of the Smooth interval recording. • Smooth interval recording is released when approximately 12 hours have elapsed after shooting has begun. • Sounds are not recorded. • The last few frames may not be recorded if the battery or tape has run out. • There may be discrepancies in the interval. • If you adjust the focus manually, you can record clear pictures even if the light changes ([FOCUS], p. 42). • You can silence the beeps during recording. INT.REC-STL (Interval photo recording) You can record still images on the "Memory Stick Duo" at a selected interval. This function is useful to observe the movement of clouds or the changes in daylight, etc. DEMO MODE The default setting is [ON], allowing you to view the demonstration in about 10 minutes, after you have removed both a cassette and a "Memory Stick Duo" from your camcorder, and slide the POWER switch down to turn on the CAMERATAPE lamp. • The demonstration will be suspended in situations such as those described below. - When you touch the screen during the demonstration. (The demonstration starts again in about 10 minutes.) - When a cassette or a "Memory Stick Duo" is inserted. - When the POWER switch is set to other than CAMERA-TAPE. - When NIGHTSHOT PLUS switch is set to ON. PRINT See page 67. Using the Menu [a]: Recording [b]: Interval Touch a desired interval time (1, 5 or 10 minutes) [ON] . Press PHOTO fully. stops flashing and the interval still image recording starts. To cancel [INT.REC-STL], select [OFF] in step . 51