Sony DCR-HC42 Operating Guide - Page 90
The sound breaks off., Horizontal lines appear on the picture. The displayed pictures are not clear or
UPC - 027242669758
View all Sony DCR-HC42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Troubleshooting (continued) Horizontal lines appear on the picture. The displayed pictures are not clear or do not appear. • Clean the head using the cleaning cassette (optional) (p. 112). No sound or only a low sound is heard. • Set [MULTI-SOUND] to [STEREO] (p. 53). • Turn up the volume (p. 23). • Adjust [AUDIO MIX] from the [ST2] (additional sound) side until the sound is heard appropriately (p. 65). • When you are using an S VIDEO plug, make sure the red and white plugs of the A/V connecting cable are connected as well (p. 34). The sound breaks off. • Clean the head using the cleaning cassette (optional) (p. 112). "---" is displayed on the screen. • The tape you are playing was recorded without setting the date and time. • A blank section on the tape is being played. • The data code on a tape with a scratch or noise cannot be read. Noises appear and is displayed on the screen. • The tape was recorded in a TV color system other than that of your camcorder (NTSC). This is not a malfunction (p. 105). is displayed on the screen. • The tape you are playing was recorded on another device with a 4ch microphone (4CH MIC REC). Your camcorder is not compatible with 4ch microphone recording. Date Search does not work correctly. • If one day's recording is less than 2 minutes, your camcorder may not accurately find the point where the recording date changes. • There is a blank section in the beginning or middle of the tape. This is not a malfunction. 90