Sony DCR-TRV10 Service Manual - Page 100
Address, Remark, INITIALIZATION OF E, F DATA, Initializing the E, Modification of E - ntsc manual
View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Address 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F 80 to FF Remark Fixed data-1 (Initialized data) Table. 5-1-4. 1-2-4. INITIALIZATION OF E, F PAGE DATA 1. Initializing the E, F Page Data Note: If the E, F page data has been initialized, following adjustments need to be performed again. 1) Modification of E, F page data 2) Camera system adjustments Adjusting page Adjusting Address Adjusting page Adjusting Address F 10 to FF E 00 to 47 Initializing Method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 6, address: 01, and set data: 2D (NTSC) or data: 2F (PAL) , and press the PAUSE button of the adjusting remote commander. 3) Select page: 6, address: 03, set data: 01, and press the PAUSE button of the adjusting remote commander. 4) Select page: 6, address: 02, and check that the data is "01". 5) Perform "Modification of F, E Page Data". 2. Modification of E, F Page Data If the E, F page data has been initialized, change the data of the "Fixed data-2" address shown in the following table by manual input. Modifying Method: 1) Before changing the data, select page: 0, address: 01, and set data: 01. 2) New data for changing are not shown in the tables because they are different in destination. When changing the data, copy the data built in the same model. Note: If copy the data built in the different model, the camcorder may not operate. 3) When changing the data, press the PAUSE button of the adjustment remote commander each time when setting new data to write the data in the non-volatile memory. 4) Check that the data of adjustment addresses is the initial value. If not, change the data to the initial value. Processing after Completing Modification of E, F Page data 1) Select page: 2, address: 00, and set data: 29. 2) Select page: 2, address: 01, and set data: 29, and press the PAUSE button of the adjusting remote commander. 5-14