Sony DCR-TRV10 Service Manual - Page 108
Flange Back Check, Switch setting, Checking method, Processing after Completing Adjustments
View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
6. Flange Back Check Subject Siemens star (2.0m from the front of the lens) (Luminance : approx. 200 lux) Measurement Point Check operation on TV monitor Measuring Instrument Specified Value Focused at the TELE end and WIDE end. Switch setting: 1) NIGHT SHOT OFF 2) DIGITAL ZOOM (Menu display OFF 3) STEADY SHOT (Menu display OFF Note: When the auto focus is ON, the lens can be checked if it is focused or not by observing the data on the page 1 of the adjustment remote commander. 1) Select page: 6, address: 04, and set data: 0F. 2) Page 1 shows the state of the focus. 1 : 00 : XX Odd: Focused Even: Unfocused Checking method: 1) Place the Siemens star 2.0m from the front of the lens. 2) To open the IRIS, decrease the luminous intensity to the Siemens star up to a point before noise appear on the image. 3) Shoot the Siemens star with the zoom TELE end. 4) Turn on the auto focus. 5) Check that the lens is focused (Note). 6) Select page: 6, address: 21, and set data: 10. 7) Shoot the Siemens star with the zoom WIDE end. 8) Observe the TV monitor and check that the lens is focused. Processing after Completing Adjustments: 1) Select page: 6, address: 21, and set data: 00. 2) Select page: 6, address: 04, and set data: 00. 5-22