Sony DCR-TRV10 Service Manual - Page 115
Bright Adjustment DD-123 board, Fig. 5-1-15.
View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
2. Bright Adjustment (DD-123 board) Set the level of the VIDEO signal for driving the LCD to the specified value. If deviated, the screen image will be blackish or saturated (whitish). Mode Camera Subject Measurement Point Arbitrary Pin 4 of CN2904 (EVF VG) on VC-217 board Measuring Instrument Oscilloscope Adjustment Page D Adjustment Address 7A Specified Value A = 7.25 ± 0.05V Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 3, address: 0C, set data: 20, and press the PAUSE button of the adjustment remote commander. 3) Select page: 3, address: 22, set data: 02, and press the PAUSE button of the adjustment remote commander. 4) Select page: D, address: 7A, change the data and set the voltage (A) between the reversed waveform pedestal and non-reversed waveform pedestal to the specified value. (The data of address: 7A should be "54" to "D7".) 5) Press the PAUSE button of the adjustment remote commander. 6) Select page: 3, address: 22, set data: 00, and press the PAUSE button of the adjustment remote commander. 7) Select page: 3, address: 0C, set data: 00, and press the PAUSE button of the adjustment remote commander. 8) Select page: 0, address: 01, and set data: 00. 3. Contrast Adjustment (DD-123 board) Set the level of the VIDEO signal for driving the LCD to the specified value. If deviated, the screen image will be blackish or saturated (whitish). Mode Camera Subject Measurement Point Arbitrary Pin 4 of CN2904 (EVF VG) on VC-217 board Measuring Instrument Oscilloscope Adjustment Page D Adjustment Address 7B Specified Value A = 1.81 ± 0.05V Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 3, address: 0C, set data: 20, and press the PAUSE button of the adjustment remote commander. 3) Select page: 3, address: 22, set data: 02, and press the PAUSE button of the adjustment remote commander. 4) Select page: D, address: 7B, change the data and set the voltage (A) between the 100 IRE and 0 IRE (pedestal) to the specified value. 5) Press the PAUSE button of the adjustment remote commander. 6) Select page: 3, address: 22, set data: 00, and press the PAUSE button of the adjustment remote commander. 7) Select page: 3, address: 0C, set data: 00, and press the PAUSE button of the adjustment remote commander. 8) Select page: 0, address: 01, and set data: 00. Pedestal A Pedestal 2H Fig. 5-1-15. 100 IRE A 2H 0 IRE (Pedestal) Fig. 5-1-16. 5-29