Sony DCR-TRV10 Service Manual - Page 125
For NTSC model, 1-6. Alignment Tapes, 1-7. Input/Output Level and Impedance
View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
3-1-6. Alignment Tapes Use the alignment tapes shown in the following table. Use tapes specified in the signal column of each adjustment. Name Use Tracking standard (XH2-1) Tape path adjustment SW/OL standard (XH2-3) Switching position adjustment Audio operation check (XH5-3 (NTSC), XH5-3P (PAL)) Audio system adjustment System operation check (XH5-5 (NTSC), XH5-5P (PAL)) Operation check BIST check (XH5-6 (NTSC), XH5-6P (PAL)) BIST check Fig. 5-3-3 shows the 75% color bar signals recorded on the alignment tape for Audio Operation Check. Note: Measure with video terminal (Terminated at 75 Ω) For NTSC model White (100%) Yellow Cyan Green Magenta Red Blue White (75%) 0.714V 1V 0.286V QI Burst signal 0.286V Horizontal sync signal Color bar signal waveform For PAL model White (100%) (75%) Q I Black White (100%) Color bar pattern White Yellow Cyan Green Magenta Red Blue Yellow Cyan Green Magenta Red Blue White Yellow Cyan Green Magenta Red Blue Black 0.7V 1V 0.3V 0.3V (100%) Horizontal sync signal Burst signal Color bar signal waveform Fig. 5-3-3. Color bar signal of alignment tapes Color bar pattern 3-1-7. Input/Output Level and Impedance Video input/output Special stereo mini jack Video signal: 1 Vp-p, 75 Ω unbalanced, sync negative S video input/output 4-pin mini DIN Luminance signal: 1 Vp-p, 75 Ω unbalanced, sync negative Chrominance signal: 0.286 Vp-p, 75 Ω unbalanced (NTSC) : 0.300 Vp-p, 75 Ω unbalanced (PAL) Audio input/output Special stereo mini jack Input level: 327mV Input impedance: More than 47kΩ Output level: 327 mV (at load impedance 47 kΩ) Output impedance: Below 2.2 kΩ 5-39