Sony DCR-TRV10 Service Manual - Page 112

Auto White Balance & LV Standard Data Input, Auto White Balance Adjustment, Address

Get Sony DCR-TRV10 - Digital Video Camera Recorder PDF manuals and user guides View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 112 highlights

12. Auto White Balance & LV Standard Data Input Subject Clear chart (Color reproduction adjustment frame) Adjustment Page F Adjustment Address 20 to 23, 3E, 3F Note 1: This adjustment should be carried out upon completion of "Color Reproduction Adjustment". Note 2: Check that the data of page: 6, address: 02 is "00". If not, select page: 6, address: 01, set data: 00, and press the PAUSE button of the adjustment remote commander. Switch setting: 1) NIGHT SHOT OFF Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 6, address: 01, set data: 11, and press the PAUSE button of the adjustment remote commander. 3) Select page: 6, address: 01, set data: 0D, and press the PAUSE button. (When the standard data is take in, the data will be automatically input to page: F, address: 20 to 23, 3E, 3F.) 4) Select page: 6, address: 02, and check that the data is "01". 5) Perform "Auto White Balance Adjustment". Processing after Completing Adjustments: 1) Select page: 6, address: 01, set data: 00, and press the PAUSE button of the adjustment remote commander. 2) Select page: 0, address: 01, and set data: 00. 13. Auto White Balance Adjustment Adjust to the proper auto white balance output data. If it is not correct, auto white balance and color reproducibility will be poor. Subject Clear chart (Color reproduction adjustment frame) Filter Filter C14 for color temperature correction Measurement Point Display data of page 1 (Note2) Measuring Instrument Adjustment remote commander Adjustment Page F Adjustment Address 34, 35 Specified Value R ratio: 2D40 to 2DC0 B ratio: 5B40 to 5BC0 Note 1: Perform "Auto White Balance & LV Standard Data Input" before this adjustment. Note 2: Displayed data of page 1 of the adjustment remote commander. 1 : XX : XX Display data Switch setting: 1) NIGHT SHOT OFF Adjusting method: 1) Place the C14 filter for color temperature correction on the lens. 2) Select page: 0, address: 01, and set data: 01. 3) Select page: F, address: 48 to 4B, and note down the data of each address. 4) Input the following data to page: F, addresses: 48 to 4B. Address 48 49 4A 4B Data 2D 80 5B 80 Note: Press the PAUSE button of the adjustment remote commander each time to set the data. 5) Select page: 6, address: 01, set data: 83, and press the PAUSE button. 6) Select page: 6, address: 01, set data: 81, and press the PAUSE button. (The auto white balance adjustment is performed and the adjustment data is stored in page: F, address: 34 and 35.) 7) Select page: 6, address: 02, and check that the data is "01". 8) Select page: 6, address: 01, set data: 3F, and press the PAUSE button. 9) Select page: 6, address: 04, and set data: 04. 10) Select page: 1, and check that the display data (Note2) satisfies the R ratio specified value. 11) Select page: 6, address: 04, and set data: 05. 12) Select page: 1, and check that the display data (Note2) satisfies the B ratio specified value. 13) Select page: F, address: 48 to 4B, and input the data noted down at step 3). Note: After setting each data, be sure to press the PAUSE button of the adjustment remote commander. Processing after Completing Adjustments: 1) Select page: 6, address: 01, set data: 00, and press the PAUSE button. 2) Select page: 6, address: 04, and set data: 00. 3) Select page: 0, address: 01, and set data: 00. 5-26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
5-26
12. Auto White Balance & LV Standard Data Input
Subject
Clear chart
(Color reproduction adjustment
frame)
Adjustment Page
F
Adjustment Address
20 to 23, 3E, 3F
Note 1:
This adjustment should be carried out upon completion of “Color
Reproduction Adjustment”.
Note 2:
Check that the data of page: 6, address: 02 is “00”. If not, select
page: 6, address: 01, set data: 00, and press the PAUSE button of
the adjustment remote commander.
Switch setting:
1)
NIGHT SHOT
..................................................................
OFF
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.
3)
Select page: 6, address: 01, set data: 0D, and press the PAUSE
button.
(When the standard data is take in, the data will be automatically
input to page: F, address: 20 to 23, 3E, 3F.)
4)
Select page: 6, address: 02, and check that the data is “01”.
5)
Perform “Auto White Balance Adjustment”.
Processing after Completing Adjustments:
1)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjustment remote commander.
2)
Select page: 0, address: 01, and set data: 00.
13. Auto White Balance Adjustment
Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.
Subject
Clear chart (Color reproduction
adjustment frame)
Filter
Filter C14 for color temperature
correction
Measurement Point
Display data of page 1 (Note2)
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
34, 35
Specified Value
R ratio: 2D40 to 2DC0
B ratio: 5B40 to 5BC0
Note 1:
Perform “Auto White Balance & LV Standard Data Input” before
this adjustment.
Note 2:
Displayed data of page 1 of the adjustment remote commander.
1 :
XX : XX
Display data
Switch setting:
1)
NIGHT SHOT
..................................................................
OFF
Adjusting method:
1)
Place the C14 filter for color temperature correction on the
lens.
2)
Select page: 0, address: 01, and set data: 01.
3)
Select page: F, address: 48 to 4B, and note down the data of
each address.
4)
Input the following data to page: F, addresses: 48 to 4B.
Note:
Press the PAUSE button of the adjustment remote commander
each time to set the data.
5)
Select page: 6, address: 01, set data: 83, and press the PAUSE
button.
6)
Select page: 6, address: 01, set data: 81, and press the PAUSE
button.
(The auto white balance adjustment is performed and the
adjustment data is stored in page: F, address: 34 and 35.)
7)
Select page: 6, address: 02, and check that the data is “01”.
8)
Select page: 6, address: 01, set data: 3F, and press the PAUSE
button.
9)
Select page: 6, address: 04, and set data: 04.
10)
Select page: 1, and check that the display data (Note2) satisfies
the R ratio specified value.
11)
Select page: 6, address: 04, and set data: 05.
12)
Select page: 1, and check that the display data (Note2) satisfies
the B ratio specified value.
13)
Select page: F, address: 48 to 4B, and input the data noted down
at step 3).
Note:
After setting each data, be sure to press the PAUSE button of
the adjustment remote commander.
Processing after Completing Adjustments:
1)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
2)
Select page: 6, address: 04, and set data: 00.
3)
Select page: 0, address: 01, and set data: 00.
Address
Data
48
2D
49
80
4A
5B
4B
80