Sony DCR-TRV10 Service Manual - Page 111
For PAL model
View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
10. Color Reproduction Adjustment Adjust the color Separation matrix coefficient so that proper color reproduction is produced. Subject Color bar chart (Color reproduction adjustment frame) Measurement Point Video output terminal Measuring Instrument Vectorscope Adjustment Page F Adjustment Address 2E, 30, 44, 45 Specified Value All color luminance points should settle within each color reproduction frame. Note: NTSC model: DCR-TRV8/TRV10 PAL model: DCR-TRV8E/TRV10E Switch setting: 1) NIGHT SHOT OFF 2) STEADY SHOT (Menu display OFF Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: F, address: 5E, set data: 29, and press the PAUSE button of the adjustment remote commander. 3) Select page: F, address: 16, set data: 37 (NTSC) or B7 (PAL), and press the PAUSE button. 4) Select page: 6, address: 01, set data: 3D, and press the PAUSE button. 5) Adjust the GAIN and PHASE of the vectorscope, and adjust the burst luminance point to the burst position of the color reproduction frame. 6) Change the data of page: F, address: 2E, 30, 44 and 45, and settle each color luminance point in each color reproduction frame. Note: Be sure to press the PAUSE button of the adjustment remote commander before changing the addresses. If not, the new data will not be written to the memory. Processing after Completing Adjustments: 1) Select page: F, address: 5E, set data: 2E, and press the PAUSE button of the adjustment remote commander. 2) Select page: 6, address: 01, set data: 00, and press the PAUSE button. 3) Select page: 0, address: 01, and set data: 00. 11. MAX GAIN Adjustment Setting the minimum illumination. If it is not consistent, the image level required for taking subjects in low illuminance will not be produced (dark). Subject Clear chart (Color reproduction adjustment frame) Adjustment Page F Adjustment Address 2C Switch setting: 1) NIGHT SHOT OFF 2) STEADY SHOT (Menu display OFF Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 6, address: 96, and set data: 00. 3) Select page: 6, address: 97, and set data: 27. 4) Select page: 6, address: 01, set data: 6F, and press the PAUSE button of the adjustment remote commander. (The MAX GAIN adjustment is performed and the adjustment data is stored in page: F, address: 2C.) 5) Select page: 6, address: 02, and check that the data is "01". Processing after Completing Adjustments: 1) Select page: 6, address: 01, set data: 00, and press the PAUSE button. 2) Select page: 6, address: 97, and set data: 00. 3) Select page: 0, address: 01, and set data: 00. For NTSC model For PAL model Burst postion Burst postion Fig. 5-1-11. 5-25