Sony DVO1000MD User Manual (Instructions For Use) - Page 2

Owner's Record, WARNING - dvo 1000md operating instructions

Page 2 highlights

Owner's Record The model and serial numbers are located at the rear. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No Serial No WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. No modification of this equipment is allowed. THIS APPARATUS MUST BE EARTHED. To disconnect the main power, unplug the power plug. When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. Do not position the ME equipment where it is difficult to unplug the power plug. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or unplug the power plug. Symbols on the products This symbol indicates the equipotential terminal which brings the various parts of a system to the same potential. This symbol indicates the manufacturer, and appears next to the manufacturer's name and address. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Refer to the operating instructions Follow the directions in the operating instructions for parts of the unit on which this mark appears. Caution When you dispose of the unit or accessories, you must obey the laws in the relative area or country and the regulations in the relative hospital. WARNING on power connection Use a proper power cord for your local power supply. 1. Use the approved Power Cord (3-core mains lead) / Appliance Connector / Plug with earthing-contacts that conforms to the safety regulations of each country if applicable. 2. Use the Power Cord (3-core main lead) / Appliance Connector / Plug conforming to the proper ratings (Voltage, Ampere). If you have questions on the use of the above Power Cord / Appliance Connector / Plug, please consult a qualified service personnel. WARNING on power connection for medical use Please use the following power supply cord. With connectors (plug or female) and cord types other than those indicated in this table, use the power supply cord that is approved for use in your area. United States and Canada Plug Type HOSPITAL GRADE* Cord Type Min.Type SJT Min.18 AWG Minimum Rating for Plug and 10A/125V Appliance Couplers Safety Approval UL Listed and CSA *Note: Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked 'Hospital Only' or 'Hospital Grade'. For the customers in Canada This unit has been certified according to Standard CAN/ CSA-C22.2 NO.60601-1. For the customers in the U.S.A. and Canada Model DVO-1000MD is Non-Patient Equipment. This unit can not be used in the vicinity of patients. * Patient Vicinity R1.(863fmeet) 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

2
Owner’s Record
The model and serial numbers are located at the rear.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ____________________
Serial No.
____________________
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
No modification of this equipment is allowed.
THIS APPARATUS MUST BE EARTHED.
To disconnect the main power, unplug the
power plug. When installing the unit,
incorporate a readily accessible disconnect
device in the fixed wiring, or connect the power
plug to an easily accessible socket-outlet near
the unit. Do not position the ME equipment
where it is difficult to unplug the power plug. If
a fault should occur during operation of the
unit, operate the disconnect device to switch
the power supply off, or unplug the power plug.
Symbols on the products
Caution
When you dispose of the unit or accessories, you must
obey the laws in the relative area or country and the
regulations in the relative hospital.
WARNING on power connection
Use a proper power cord for your local power supply.
1.
Use the approved Power Cord (3-core mains lead) /
Appliance Connector / Plug with earthing-contacts
that conforms to the safety regulations of each
country if applicable.
2.
Use the Power Cord (3-core main lead) / Appliance
Connector / Plug conforming to the proper ratings
(Voltage, Ampere).
If you have questions on the use of the above Power
Cord / Appliance Connector / Plug, please consult a
qualified service personnel.
WARNING on power connection for
medical use
Please use the following power supply cord.
With
connectors (plug or female) and cord types other than
those indicated in this table, use the power supply cord
that is approved for use in your area.
*Note: Grounding reliability can only be achieved when the
equipment is connected to an equivalent receptacle marked ‘Hospital
Only’ or ‘Hospital Grade’.
For the customers in Canada
This unit has been certified according to Standard CAN/
CSA-C22.2 NO.60601-1.
For the customers in the U.S.A. and
Canada
Model DVO-1000MD is Non-Patient Equipment.
This unit can not be used in the vicinity of patients.
* Patient Vicinity
WARNING
This symbol indicates the equipotential
terminal which brings the various parts of a
system to the same potential.
This symbol indicates the manufacturer, and
appears next to the manufacturer’s name and
address.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Refer to the operating instructions
Follow the directions in the operating
instructions for parts of the unit on which
this mark appears.
United States and Canada
Plug Type
HOSPITAL GRADE*
Cord Type
Min.Type SJT
Min.18 AWG
Minimum Rating for Plug and
Appliance Couplers
10A/125V
Safety Approval
UL Listed and CSA
R1.83m
(6 feet)