Sony DVO1000MD User Manual (Instructions For Use) - Page 53

Menu Item FREEZE MODE DISC END REGION CODE Function Setting To select the [FRAME]: Displays a frame type of frozen frozen picture when you push picture the button, then the first field displayed when is frozen when you push the playback is button next, and then the paused. (This is second field is frozen when effective only you push the button a third when the v time. button on the front panel or the FREEZE button on the SVRM-100A remote control unit (not 1ST FIELD: Whenever you push the button, the frozen picture displayed changes in the sequence of the first field, then the 2nd field, and then the frame. supplied) is 2ND FIELD: Whenever you used) push the button, the frozen picture displayed changes in the sequence of the 2nd field, then the frame, and then the first field. To select the operation when the disc becomes full during recording GOTO TOP: Returns to the beginning of the disc. END STOP: Returns to the beginning of the last tile, and end recording automatically. However, the disc is not ejected and remains in the tray. [EJECT]: Stops recording and the disc is automatically ejected. To select the region code for playbackb) [1]: Plays a disc recorded in North America. (This region code is not available for the PAL video signal system.) 2: Plays a disc recorded in Western Europe (PAL), the Middle East (PAL), South Africa (PAL) and Japan (NTSC) 3: Southeast Asia including Hong Kong c) 4: Central and South America, and Australia (PAL) 5: Africa (NTSC), Eastern Europe, Russia, Central Asia, including India (PAL) PRE REC 6: China (PAL) To select ON Starts recording using the whether or not last five seconds of video data the unit starts saved previously. recording with data pre-stored for five seconds [OFF]: Starts recording promptly after you start. Item Function Setting B/W MODE To forcibly switch the signal process mode of the VIDEO IN, VIDEO OUT and S-VIDEO OUT connectors to the black and white signal [OFF]: Processes the signal from the VIDEO IN, VIDEO OUT and S-VIDEO OUT connectors as normal color signals. ON: Records the signal input to the VIDEO IN connector as a black and white signal with a wide range, and forcibly cuts the output burst signal from the VIDEO OUT and S-VIDEO connectors. Select this setting when black and white signals are input to the VIDEO IN connector and output from the VIDEO OUT connector. DATE/TIME To set the date and time of the unit. PRESET MENU GRADE To display the [BASIC]: Displays only the enhanced menu basic menu. ENHANCED: Displays the enhanced menu under the basic menu. d) a) Indexes recorded automatically cannot be erased. b) If the video signal system does not match the one used in your area, the disc cannot be played back even if the correct region code is selected. Set the video signal system to either NTSC or PAL on the TV SYSTEM sub menu of the ENHANCED MENU. c) In Southeast Asia area, the PAL TV system and the NTSC TV system are mixed. Check whether your TV system is NTSC or PAL before using this unit. d) For detailed information on the enhanced menu, see the following"ENHANCED MENU - Enhanced Sub Menu". ENHANCED MENU - Enhanced Sub Menu Proceed as follows to open the enhanced menu. 1 Select "MENU GRADE" on the SETUP MENU by pressing the V or v button. 2 Press the b button. 53 Menu Configuration and the Menu List