Sony DVO1000MD User Manual (Instructions For Use) - Page 34
Adding Information to Titles, Pre Rec Function, To use the keyboard of an RS-232C remote - keyboard operation
View all Sony DVO1000MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Recording The FOOT SW sub menu appears. 5 Select the desired mode by pressing the V or v button. Mode LOW EDGE HIGH EDGE LOW ACTIVE Setting To start recording when you push the foot switch, or to pause recording during recording. Even if you release the foot switch, the recording or pause recording status remains in effective. (Factory setting) To start recording when you push the foot switch and release it, or to pause recording during recording. The unit does not change from one operation to another when you push the foot switch. While you hold the foot switch down, the unit records. When you release the foot switch, the unit pauses. 6 Press the SET button. The message "NOW SAVING..." appears and the unit starts to save the setting. When the saving is completed, the message disappears and the unit returns to the normal display. Adding Information to Titles When you record data, the recording month/date/year/ hour/minute/second (example: 01/06/04 17:25:19) is recorded automatically. Also, the use of an RS-232C remote control device (not supplied) allows you to change the title name and to record data of 2048 bytes every title using the keyboard of the remote control unit. Thus, you can record additional information for a title. To use the keyboard of an RS-232C remote control device for editing/adding title name and information You should carry out the following operation and menu settings: • Connect the remote control device to the RS-232C connector of the unit. • Set the REMOTE I/F sub menu (see page 52) of the SETUP MENU to RS232C. • Set the KEYBOARD sub menu (see page 52) of the SETUP MENU to ON. You can enter characters in overwrite mode. Use the ESC key for the backspace function. Notes • Before connecting the remote control device to the RS-232C connector of the unit, be sure to set the unit to the standby mode by using the 1 (on/standby) switch on the front panel of the unit. For detailed information on how to turn off the power of the unit, see "Turning the Power Off" on page 20. • When not using the remote control device, be sure to set the KEYBOARD sub menu of the SETUP MENU to OFF (see page 52). To add information to the title or edit title information The TITLE INFO display of the title menu allows you to edit title information. Title name Title information (data of 2048 bytes) For detailed information, see "Verifying/Editing Information About the Title" on page 47. When you record using equipment such as external equipment, data is recorded via the communication protocol. Pre Rec Function When the PRE REC sub menu of the SETUP is set to "ON," the unit saves the last 5 seconds of video data in the inernal memory. This function allows the unit to start 34 Recording