Sony DVO1000MD User Manual (Instructions For Use) - Page 21

Setup Preparation, Selecting Either NTSC or PAL Video Signal System

Get Sony DVO1000MD PDF manuals and user guides View all Sony DVO1000MD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Overview Setup Preparation Before you start to use the unit after you have made the required connections, it is necessary to perform the following operations. • Selecting either NTSC or PAL video signal system Select the video signal system used in your region. For detailed information, see "Selecting Either NTSC or PAL Video Signal System" (page 21). • Setting the date and time You should set the date and time when you start the unit for the first time. For detailed information, see "Setting the Date and Time" (page 23). • Selecting the remote interface Select the remote interface to be used to control the unit remotely. At the factory, RS232C is selected as the default. If you want to use either USB or i.LINK, change the remote interface setting. For detailed information, see "Selecting the Remote Interface" (page 25). Selecting Either NTSC or PAL Video Signal System When you use the unit for the first time, you should select the video signal system. The TV SYSTEM sub menu of the ENHANCED MENU of the SETUP MENU allows you to select either the NTSC or PAL video signal system. For detailed information on menu operations, see "Basic Menu Operations" (page 55). Note At the factory setting, the NTSC video signal is selected as the default. Even if your monitor does not correspond to the video signal system currently selected, you can carry out the menu operations using the main display section of the front panel display. Select the proper video signal system corresponding to the one used in your area. 11,12 10 1 2,4,9 3,5,6,8 4,6,7 1 Press the MENU button. The TOP menu appears. 2 Select "SETUP MENU" by pressing the V or v button. "SETUP MENU" is highlighted. 3 Press the b button. 21 Setup Preparation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Overview
Setup Preparation
21
Setup Preparation
Before you start to use the unit after you have made the
required connections, it is necessary to perform the
following operations.
•
Selecting either NTSC or PAL video signal system
Select the video signal system used in your region.
For detailed information, see “Selecting Either NTSC
or PAL Video Signal System” (page 21).
•
Setting the date and time
You should set the date and time when you start the
unit for the first time.
For detailed information, see “Setting the Date and
Time” (page 23).
•
Selecting the remote interface
Select the remote interface to be used to control the
unit remotely. At the factory, RS232C is selected as
the default. If you want to use either USB or i.LINK,
change the remote interface setting.
For detailed information, see “Selecting the Remote
Interface” (page 25).
Selecting Either NTSC or PAL Video
Signal System
When you use the unit for the first time, you should
select the video signal system. The TV SYSTEM sub
menu of the ENHANCED MENU of the SETUP MENU
allows you to select either the NTSC or PAL video
signal system.
For detailed information on menu operations, see
“Basic Menu Operations” (page 55).
Note
At the factory setting, the NTSC video signal is selected
as the default. Even if your monitor does not correspond
to the video signal system currently selected, you can
carry out the menu operations using the main display
section of the front panel display.
Select the proper video signal system corresponding to
the one used in your area.
1
Press the MENU button.
The TOP menu appears.
2
Select “SETUP MENU” by pressing the
V
or
v
button.
“SETUP MENU” is highlighted.
3
Press the
b
button.
10
1
3,5,6,8
2,4,9
11,12
4,6,7