Sony DVO1000MD User Manual (Instructions For Use) - Page 52

Menu SETUP MENU This menu allows you to perform various settings depending on your circumstances to use the unit. Item Function Setting REC MODE To select a HQ: Records a high-quality recording mode picture. [SP]: Records in standard mode. LP: Records for a longer time. AUDIO MON CH To select a signal to be output from the MONITOR AUDIO connector on the rear panel LCH: Outputs the audio signal of audio channel 1. RCH: Outputs the audio signal of audio channel 2. [MIX]: Outputs a mixed audio signal from both channel 1 and channel 2. INPUT SELECT To select a [ANALOG]: Inputs the analog video and audio signal to the VIDEO IN or S- input signals VIDEO IN connector. iLINK: Inputs the digital signal to the DV IN (i.LINK) connector. REMOTE I/F To select an interface to use to control the unit [RS232C]: Controls the unit with equipment connected to the RS-232C connector (a protocol which is compatible with the SVO-9500MD Sony video cassette recorder protocol). i.LINK: Controls the unit with equipment connected to the DV IN (i.LINK) connector. USB: Controls the unit with equipment connected to the USB connector (a protocol which is compatible with the RS-232C protocol). KEYBOARD To select whether or not the keyboard of the RS-232C remote control device (not supplied) is to be activated ON: Uses the keyboard. [OFF]: Does not use the keyboard. Item Function Setting BAUDRATE To select a 9600 /[19200]/38400/57600/ communication 115200 speed (baud rate) when controlling the unit by equipment connected to the RS-232C connector FOOT SW To select the [LOW EDGE]: Starts operation to be recording, or pauses carried out recording during recording, when you press when you press the foot or release the switch. Even if you release foot switch (not the foot switch, the recording supplied) or pause recording status remains in effective. HIGH EDGE: Starts recording or pausing during recording when you press and release the foot switch. The unit does not change from one operation to another when you press the foot switch. AUTO INDEX To select whether or not indexes are automatically marked during recording LOW ACTIVE: While you hold the foot switch down, the unit records. When you release the foot switch, the unit pauses. ON a): Marks indexes automatically every 5 minutes. [OFF]: Does not mark indexes automatically. AUTO TITLE To select [ON]: Creates a next title whether or not a automatically. It is new title is recommended to select this automatically setting when connecting VHS created when equipment. the number of indexes in one title exceeds 99. OFF: Does not create a next title automatically. KEY INHIBIT To deactivate ON: Activates the key lock buttons to function. protect them from accidental operation except the [OFF]: Deactivates the key lock function. All of the buttons are effective. MENU, LIST, 1 (on/standby), and OPEN/ CLOSE buttons 52 Menu Configuration and the Menu List