Sony DVO1000MD User Manual (Instructions For Use) - Page 54

BENHANCED MENU sub menu

Get Sony DVO1000MD PDF manuals and user guides View all Sony DVO1000MD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Menu The following display appears. 3 Select "ENHANCED" by pressing the v button, and press the B button. The enhanced sub menu items appear under the last item of the basic menu. ENHANCED MENU sub menu Item Function Setting TV SYSTEM 232C STOP a) To select either the NTSC or PAL video signal system To select the operation when a STOP command is received from the RS-232C interface during recording [NTSC] /PAL REC PAUSE: Pauses recording. [REC STOP]: Stops recording. 232C FF/ REW a) To select the search operation when a FF/ REW command is received from the RS-232C interface NEXT/PREV: Performs the same operation of the >NEXT/DOWN and .PREV/UP buttons of the unit when receiving the FF or PREV command. [FF/REW]: Jumps to the top of the disc when receiving the FF command or REW command. Item Function Setting RECPAUSE INDEX To select [ON]: Marks a index. whether or not the unit marks OFF: Does not mark a index. a index when Note restarting the The setting of the PRE REC recording sub menu (see page 53) of the operation SETUP MENU is again after compulsorily set to "OFF," recording was when RECPAUSE INDEX is paused by set to "OFF." pressing the XPAUSE button during recording. REC COUNTER To select the content of the time display on the front panel display during recording REMAIN: Displays the remaining capacity of the disc. [COUNTER]: Displays the elapsed time of recording. DEVICE TYPE a) To select the [DVO]: Select this when the device which unit is connected to video sends back the equipment such as external response equipment. when a device type INQ command of RS-232C protocol is SVO9500: Select this when the unit is used to replace an existing Sony SVO-9500MD video cassette recorder. received DVD To select the WRITEMODE method in which data is written to the DVD. [NORMAL]: Data is recorded in units of several seconds, and is written consecutively to the HDD and then the DVD during recording. If a disc error occurs, data can be recovered from up until the point immediately preceding the error occurrence. HOUR METER AFTER HDD: Data is written only to the HDD during recording, and is written to the DVD during stop and playback. After recording is stopped, the disc cannot be removed until the data writing process to the disc is complete. If a disc error occurs, data can be recovered from the titles recorded to the HDD. To display the total time of the use of hard disc drive and DVD drive, and the number of times the tray is opened and closed Display only b) a) This item is effective when "RS232C" or "USB" is selected for the "REMOTE I/F" item of the basic menu. 54 Menu Configuration and the Menu List

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Menu
Menu Configuration and the Menu List
54
The following display appears.
3
Select “ENHANCED” by pressing the
v
button,
and press the
B
button.
The enhanced sub menu items appear under the last
item of the basic menu.
ENHANCED MENU sub menu
a) This item is effective when “RS232C” or “USB” is selected for the
“REMOTE I/F” item of the basic menu.
Item
Function
Setting
TV SYSTEM
To select
either the
NTSC or PAL
video signal
system
[NTSC]
/PAL
232C STOP
a)
To select the
operation
when a STOP
command is
received from
the RS-232C
interface
during
recording
REC PAUSE: Pauses
recording.
[REC°STOP]
: Stops recording.
232C FF/
REW
a)
To select the
search
operation
when a FF/
REW
command is
received from
the RS-232C
interface
NEXT/PREV: Performs the
same operation of the
>
NEXT/DOWN and
.
PREV/UP buttons of the
unit when receiving the FF or
PREV command.
[FF/REW]
: Jumps to the top of
the disc when receiving the FF
command or REW command.
RECPAUSE
INDEX
To select
whether or not
the unit marks
a index when
restarting the
recording
operation
again after
recording was
paused by
pressing the
X
PAUSE
button during
recording.
[ON]
: Marks a index.
OFF: Does not mark a index.
The setting of the PRE REC
sub menu
(see page 53)
of the
SETUP MENU is
compulsorily set to “OFF,”
when RECPAUSE INDEX is
set to “OFF.”
REC
COUNTER
To select the
content of the
time display
on the front
panel display
during
recording
REMAIN: Displays the
remaining capacity of the disc.
[COUNTER]
: Displays the
elapsed time of recording.
DEVICE
TYPE
a)
To select the
device which
sends back the
response
when a device
type INQ
command of
RS-232C
protocol is
received
[DVO]
: Select this when the
unit is connected to video
equipment such as external
equipment.
SVO9500: Select this when the
unit is used to replace an
existing Sony SVO-9500MD
video cassette recorder.
DVD
WRITEMODE
To select the
method in
which data is
written to the
DVD.
[NORMAL]
: Data is recorded in
units of several seconds, and is
written consecutively to the
HDD and then the DVD during
recording. If a disc error
occurs, data can be recovered
from up until the point
immediately preceding the
error occurrence.
AFTER HDD: Data is written
only to the HDD during
recording, and is written to the
DVD during stop and
playback. After recording is
stopped, the disc cannot be
removed until the data writing
process to the disc is complete.
If a disc error occurs, data can
be recovered from the titles
recorded to the HDD.
HOUR
METER
To display the
total time of
the use of
hard disc
drive and
DVD drive,
and the
number of
times the tray
is opened and
closed
Display only
b)
Item
Function
Setting
Note