Sony DVO1000MD User Manual (Instructions For Use) - Page 39

Playback Playback Playback Usable Discs You can use the 4 x DVD+RW discs. Note The recorded discs may not be able to be played back due to scratch on the disc, dust accumulated on the disc, conditions recorded or recording equipment. Playback a Disc 13 2,4 5 xSTOP button 1 Press the 1 (on/standby) switch to turn the power on. The message "Welcome" appears on the front panel. When the message changes to "Now loading...", and then to "NO DISC!.", go to the next operation. Note If the power is not turned on and the front panel display does not light even if you press the 1 (on/ standby) switch, check whether the MAIN POWER switch on the rear panel is set to the ] (on) side. For detailed information on how to turn the power on or off, see "Turning the Power On/Off" on page 20. 2 Press the OPEN/CLOSE button. The disc tray opens. The message changes to "OPEN" on the front panel display. 3 Place the disc to be played on the tray. 4 Press the OPEN/CLOSE button. The disc tray closes. The DISC IN display blinks and the message "Now loading..." appears on the front panel display. Go to step 5, after the message Now loading..." disappears and the DISC IN display lights up. 5 Press the BPLAY button. Playback starts. Note For a moment, the picture is frozen and audio playback stops between titles. To stop playback Press the xSTOP button. Fast Forward or Reverse Playback To view fast forward playback Press the >NEXT/DOWN button with the BPLAY button held down. This allows you to view fast forward playback at a speed three times the speed of normal playback. To view reverse playback Press the .PREV/UP button with the BPLAY button held down. This allows you to view fast reverse playback at a speed three times the speed of normal playback. Adding Indexes During Playback You can add indexes using the SVRM-100A remote control unit. For detailed information on how to add indexes, see "Using an SVRM-100A Remote Control Unit (Not Supplied)" on page 65. 39 Playback