Sony DVO1000MD User Manual (Instructions For Use) - Page 4
Important EMC notices for use in, the medical environments, DVO-1000MD. - dvo 1000md
View all Sony DVO1000MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Important EMC notices for use in the medical environments • The DVO-1000MD needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in this instructions for use. • The portable and mobile RF communications equipment such as cellular phones can affect the DVO-1000MD. List of cables used for EMC tests Type of cable Specifications AC Main Cable 2.5m, unshielded Video Cable 5m, shielded S-Video 5m, shielded Audio 5m, shielded RS-232C 5m, shielded i-Link Cable 3.5m, shielded USB Cable 3m, shielded Warning The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony Corporation, may result in increased emissions or decreased immunity of the DVO-1000MD. Guidance and manufacturer's declaration-electromagnetic emissions The DVO-1000MD is intended for use in the electromagnetic environment specified below. The customer or the user of the DVO-1000MD should assure that it is used in such an environment. Emission test Compliance Electromagnetic environment-guidance RF emissions CISPR 11 Group 1 The DVO-1000MD uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. RF emissions CISPR 11 Harmonic emissions IEC 61000-3-2 Class B Class A The DVO-1000MD is suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes. Voltage fluctuations/ flicker emissions Complies IEC 61000-3-3 Warning If the DVO-1000MD should be used adjacent to or stacked with other equipment, it should be observed to verify normal operation in the configuration in which it will be used. 4