Sony DVO1000MD User Manual (Instructions For Use) - Page 42

The REPEAT A-B display appears. Point A is set and "A" disappears. Then, "B" is displayed as a white letter. "A" disappears, and "B" is highlighted in white. Playback 5 Select "A-B SET" by pressing the v button. 6 Press the SET button. Playback starts, and "A" is displayed as a white letter at the bottom left of the screen. "A" is highlighted in white. 7 Press the SET button at the instant when the picture comes to the point you want to set that as point A. If you return to the previous menu display by pressing the B button after setting only point A The point A set is cancelled. The points A and B previously set are retained. If you press the b button again, you can start setting the point B. 8 Press the SET button at the instant when the picture comes to the point you want to set as point B. The point B is set and "B" disappears. The repeat playback starts between the points A and B set. Those points A and B are stored until you set new points A and B or until the disc is unloaded. Note When erasing a title (see page 49) or formatting a disc (see page 38), points A and B set are cleared. Stopping repeat playback between points A and B The following two methods are available to stop repeat playback between two points. • Using the B, b, .PREV/UP, or >NEXT/ DOWN button • Using a menu operation To stop repeat playback using the B, b, .PREV/UP, or >NEXT/DOWN button Jump to a title or a chapter located outside of the section specified by the A and B points using the B, b, .PREV/UP, or >NEXT/DOWN button. To stop repeat playback by menu operations 1 Follow the procedure in steps 1 to 2 described in "Repeat Playback Between Two Points (A-B Repeat)" on page 41 to display the REPEAT FUNCTION item. 42 Repeat Playback