Sony ICD-R100PC ICD-PCLink Software Instructions - Page 14
Starting Up the ICD-PCLINK Software continued, Connect the IC recorder to your computer., Click [OK]. - digital recorder
View all Sony ICD-R100PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Starting Up the ICD-PCLINK Software (continued) 3 Connect the IC recorder to your computer. Make sure that the IC recorder is in the stop mode and connect the cable to the DIGITAL I/O connector of the IC recorder. Note Be sure not to connect the cable while operating the IC recorder (recording , playback, etc.). Doing so may damage the data in the IC recorder. To DIGITAL I/O connector Your computer Connecting cable (supplied) (For connection with the computer, see page 12.) Notes • If you leave the IC recorder connected to the computer for an extended period of time, the batteries in the IC recorder may be exhausted. Be sure to disconnect the cable from the IC recorder after use. • Do not remove the batteries from the IC recorder while it is connected to the computer. • While the IC recorder is connected to the computer, you cannot operate the IC recorder. The alarm playback, if set, will not be activated either. 4 Click [OK]. Data transmission between the IC recorder and the computer starts. When the data transmission is completed, the ICD-PCLINK main window (Page 16) appears. 14