Sony ICD-R100PC ICD-PCLink Software Instructions - Page 54
Troubleshooting continued, Message, Area Full, Problem/Remedy
View all Sony ICD-R100PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Troubleshooting (continued) Message • Battery Low Error "Disconnect the connecting cable from the IC Recorder, and replace batteries." • Transfer Error "No more space available on selected drive." "No more space available in IC Recorder." • Message Management Area Full "Part of message was not transferred successfully." • File Format Error "This WAV file cannot be transferred to IC Recorder. Please convert to PCM, 11,025Hz, 8/16 Bit, Mono." "Could not transfer due to an incompatible file format. (The file was created by a different model.)" Problem/Remedy • The batteries in the IC recorder are exhausted.* tDisconnect the cable, replace the batteries with new ones and reconnect the cable. • The available space on the selected disk drive is too small for saving messages or backup files. Clear space on the drive, or select another one. • The memory space in the IC recorder is too small for transferring sound files or backup files to the IC recorder. Delete some messages. • The memory space on the area that controls messages in the IC recorder is too small for transferring files to the IC recorder. • WAV files other than PCM 11kHz, 8/ 16 Bit Monaural format cannot be transferred to the IC Recorder. Save the WAV file after changing the format, and try again (see page 32). • The ICS files that can be transferred to the IC Recorder are ICS files of messages recorded with the Sony IC Recorder ICD-R100 only. ICS files of other format cannot be transferred, e.g. ICS files created by a different model. 54