Sony MZ-NF810CK Service Manual - Page 32
Rewriting the NV values
View all Sony MZ-NF810CK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
MZ-NF810/NF810CK Rewriting the NV values Caution: The application that meets the microcomputer version in this set must be used when rewriting the NV values. Rewriting the NV values using the application not suitable for the microcomputer version could cause the set to malfunction. For a checking method of the microcomputer version, see "SECTION 4 TEST MODE" (page 13). • Preparation 1. USB cable (attached to the set) 2. Personal computer in which the Net MD Driver has been installed. (For further information, see "System requirements" (page 4) in "SECTION 1 SERVICING NOTES") 3. Application "NVWriter" for NV values rewriting • How to get the application "NVWriter" for NV values rewriting Contact our service technical support division to get the application. • Pre-check 1. Check the microcomputer version in this set. (For a checking method of the microcomputer version, see "SECTION 4 TEST MODE" (page 13).) 2. Check that the Net MD Driver has been installed in the personal computer. 3. Make sure that the set is in the Normal mode. Note: Do not rewrite the NV values in the Test mode. • Rewriting the NV values 1. Connect the set to the personal computer with the USB cable. 2. Start the application "NVWriter". 3. Make sure that the following window opens. 4. Click the [USB CONNECT] button. 32