Sony SLT-A77VM Instruction Manual (Large File - 18.35 MB) - Page 121

Shooting (Advanced operations) Adjusting the focus AF Micro Adj. You can finely adjust the focus of each lens. Perform this operation only when needed. Note that you may not be able to properly focus on a subject if you have made a poor adjustment. MENU button t 2 t [AF Micro Adj.] t [On] t [amount] t Select the desired value • The larger the value, the farther the focusing position from the camera; the smaller the value, the nearer the focusing position to the camera. Notes • We recommend that you decide the value under actual shooting conditions. • When you attach a lens that is registered on the camera, the registered value is displayed. When you attach an unregistered lens, "±0" is displayed. If "-" is displayed as the value, then a total of 30 lenses have been registered. When you want to register a new lens, attach a lens for which you can delete its registered value, and set that value to "±0," or reset the values of all the lenses with [Clear]. • If you perform AF fine adjustment with a lens of other manufacturers, the adjustment values of Sony, Minolta, and Konica Minolta lenses may be affected. Do not use this function with any lens of other manufacturers. • You cannot individually perform AF fine adjustment when using the Sony, Minolta, and Konica Minolta lenses that have the same specifications. Object Tracking Keeps the focusing on a moving subject while tracking it. The Object Tracking function is set to [On] in the default setting. 1 Press the center of the multi-selector on the recording information display. A target frame appears. • To turn off the Object Tracking function, press the Fn button, then set it to [Off]. 121