Sony VPL DX15 Operating Instructions - Page 18

Control Panel PUSH ENTER 1 MENU 2 INPUT 3 LAMP/COVER 4 5 Top of projector a PUSH ENTER/v/V/b/B (Arrow) keys Used to enter the settings of items in the menu system, select a menu, or make various adjustments. b MENU key Displays the on-screen menu. Press again to clear the menu. c INPUT key Select the input signal. Each time you press the key the input signal switches. d LAMP/COVER indicator Flashes in orange under the following conditions: • A repetition rate of 2 flashes when the lamp cover is not secured firmly. • A repetition rate of 3 flashes when the lamp has reached the end of its life or reaches a high temperature. For details, see page 64. e ?/1 (On/Standby) key Turns on the projector when it is in standby mode. When you press ?/1 key, this key flashes in green and then lights 18 Location and Function of Controls (Main Unit) in green when the projector is ready to operate. To turn off the power, press the ?/1 key twice according to the message or hold the ?/1 key for about two seconds. ?/1 key lights up or flashes under the following conditions: - Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode, you can turn it on with the ?/1 key. - Flashes in red when the internal temperature is high or the electrical system has failed. - Lights in green when the projector is turned on, and when it is ready to operate. - Flashes in green from the time when the projector is turned on until the projector is ready to operate. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 key. The fan runs for about 90 seconds after the power is turned off (during cooling). - Lights in orange when the power saving mode is on.