Sony VPL DX15 Operating Instructions - Page 54

The Installation Menu The Installation menu is used for changing the settings of the projector. Lamp Mode Direct Power ON Auto Standard Off Setting items V Keystone Functions Sets Auto V Keystone correction. • Auto: For Auto V Keystone correction to be active • Manual: For Auto V Keystone correction to be inactive For details, see "Correcting the Trapezoidal Distortion Automatically (Auto V Keystone Correction)" on page 31. Initial setting Auto Image Flip Flips the picture on the screen horizontally and/or Off vertically. Use this item for installation for rear projection. • HV: Flips the picture horizontally and vertically. • H: Flips the picture horizontally. • V: Flips the picture vertically. • Off: The picture does not flip. Lamp Mode Sets the lamp brightness used during the projection. Standard • High: For the projected image to be brighter than Standard Select this when ambient lighting is too bright to view the display clearly. • Standard: For the projected image in standard brightness Direct Power On Set to "On" if you are using a circuit breaker to turn the Off power on/off the entire system. You can turn the power on/off without pressing the ?/1 key. Notes • Since the V keystone adjustment is an electronic correction, sometimes the image will be deteriorated. • When the Lamp Mode is set to "High", the sound from the fan to cool the lamp, etc. is often excessive. 54 The Installation Menu