Sony VPL DX15 Operating Instructions - Page 23

Projecting the Picture Connecting a Computer This section describes how to connect the projector to a computer. For more information, refer to the computer's instruction manual. To connect a computer Rear • If you set your computer, such as a notebook computer, to output the signal to both your computer's display and the external monitor, the picture of the external monitor may not appear properly. Set your computer to output the signal to only the external monitor. For details, refer to the operating instructions supplied with your computer. Note To connect a Macintosh computer equipped with a video output connector of a type having two rows of pins, use a commercially available plug adaptor. to INPUT A connector to AUDIO connector 21 to monitor output to audio output Computer A Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) B HD D-sub 15-pin cable (supplied) Notes • The projector accepts VGA, SVGA, XGA, WXGA, WXGA+, SXGA and SXGA+ signals. However, we recommend that you set the output mode of your computer to XGA for the external monitor. Connecting the Projector 23