Sony VPL DX15 Operating Instructions - Page 27

To input from Press INPUT to display Video equipment Video connected to the VIDEO input connector Video equipment connected to the S VIDEO input connector S-Video Computer connected to a Network LAN to use the network function USB memory connected USB to the USB connector When the selected input is a computer signal, APA (Auto Pixel Alignment) functions automatically to adjust the image from the connected equipment for clear display. For details, see "Adjusting the Image Quality (Smart APA)" on page 39. When Network or USB is selected (VPL-DX15 only) When Network is selected, the confirmation display to show disconnection with USB memory appears. When USB is selected, the confirmation display to show disconnection with the network equipment appears. If the network or USB memory is not connected, or if they are to be turned off, press the ENTER key. Note If "Auto Input Search" is set to "On," the projector searches for the signals from the connected equipment and displays the input signal where the input signals are found. In VPL-DX15, if there is no input signal, "Network" is selected. For details, see "Auto Input Search" on page 52. 8 Switch the equipment connected to output to the projector. Depending on the type of your computer, for example a notebook, or an all-in-one LCD type, you may have to switch the computer to output to the projector by pressing certain keys (e.g., , etc.), or by changing your computer's settings. or and Note The key used for switching the computer to output to the projector varies depending on the type of computer. Projecting 27 Projecting the Picture