TEAC DP-004 DP-004 Owners Manual (English) - Page 34
-Preparations, Preparing the power and SD card, Installing an SD card
View all TEAC DP-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4-Preparations Preparing the power and SD card Installing an SD card An SD card is used as recording media for recording and playback. •• Cards that comply with SD and SDHC standards can be used. •• Cards should be at least 512 MB in size. •• A list of SD cards that have been tested with this unit can be found on the TASCAM web site (www.tascam.com). Insert the SD card into the SD card slot inside the battery compartment on the bottom of the unit. 1 Make sure the unit power is OFF. Open the battery compartment and remove the batteries if they are inside. 2 Insert the SD Card into the slot as shown in the following illustration until it clicks into place. 3 Replace the batteries if you are using them and close the cover. Ejecting the card Push an inserted card in further to eject it. 34 TASCAM DP-004