TEAC DP-004 DP-004 Owners Manual (English) - Page 71
Confirming the result, Locate and search functions, Direct locate function - tascam digital 4 track recorder
View all TEAC DP-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
7-Recorder Functions the way left (bounced to track 1 or 3) or all the way right (track 2 or 4). Use the MASTER LEVEL knob to adjust the overall level. 6 After returning to the start of the song, press the playback (Á) key while pressing and holding the record (-) key to start the bounce. TIP If it is possible that you might need the original tracks at some later time, back-up the track data to a computer or copy the song before bouncing (see "Backing-up songs" on page 94 and "Connecting with a computer" on page 92). Confirming the result Raise the bounce destination track LEVEL knob (turn other track LEVEL knobs all the way down) and the MASTER LEVEL knob, and start playback from the beginning of the song. If you are not satisfied with the result because, for example, the balance between instruments is poor, or the pan settings are wrong, use the undo function (see "Undoing the last operation (single undo)" on page 66). If you are satisfied with the result, press the REC MODE key to open the RECORDER MODE screen and select MULTI TRACK, then press the HOME key to return to the Home Screen. After bouncing tracks, you can make new recordings over the other tracks. Locate and search functions Direct locate function This is the way to locate a specific position in a song. The current recorder position is shown at the top of the display as "hours: minutes: seconds: frames" (there are 30 frames per second). You can move the transport location to a specific time by inputting it here. 1 Use the F1 (DIGIT) key to move the cursor (underline) between the time divisions. You can edit the value at the cursor positions. The seconds are selected in the following figure. TASCAM DP-004 71