TEAC DP-004 DP-004 Owners Manual (English) - Page 68
Erasing the operation history, key to clear the operation history
View all TEAC DP-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
6-Basic Recording Erasing the operation history When the power is turned OFF, the operation history of the currently loaded song is erased (cleared). The operation history is not restored, so past operations cannot be undone or redone when the power is turned ON again. NOTE The operation histories of songs that are not loaded are not erased when the power is turned OFF. You can also erase (clear) the operation history of the currently loaded song without turning the power OFF. 1 Press the UN/REDO key while pressing and holding the stop (ª) key to open the HISTORY screen. 2 Press the F4 (CLEAR) key. A confirmation message appears. 3 Press the F3 (YES) key. A confirmation message appears again. 4 Press the F3 (YES) key to clear the operation history and erase unused data. The Home Screen reopens when this operation completes. •• To cancel erasing the operation history, press the F4 (NO) key instead of the F3 (YES) key. TIP • If you open the HISTORY screen immediately after erasing the operation history, the event (operation) that appears is "0" (START UP), showing that the operation history has been cleared. • If you want to keep the operation history even when you power OFF, turn song protect ON before turning the power OFF (see "Protecting songs" on page 53). CAUTION You cannot undo erasing the operation history! Only do it if you are certain about it. 68 TASCAM DP-004