TEAC DP-004 DP-004 Owners Manual (English) - Page 59
key. This is the Return To Zero RTZ, key. This is the Last Recording Point
View all TEAC DP-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
For example, if you press the REC keys for track 1, track 2 and track 3 in that order, track 1, which was pressed first, will no longer be in record standby, but track 2 and track 3, which were pressed afterwards, will be in record standby. 2 Set the recording level. Turn the (INPUT A or INPUT B) LEVEL knob to adjust the input level of the input channel. Watch the display meters and the OL indicator above and to the left of the LEVEL knob while setting the level suitably. At the same time, confirm that sound heard from the headphones is not distorted. NOTE The meter for the track that the input signal is assigned to moves simultaneously with the corresponding input meter (A or B). OL indicator The OL indicator lights if the input is too loud. If 6-Basic Recording the OL indicator stays lit even when you lower the LEVEL knob, lower the output level on the signal source connected to the input. Overload warning bar 3 Press the playback (Á) key while pressing and holding the record (-) key. Recording starts and the record (-) key indicator lights red. The track REC indicator changes from blinking to lit. 4 Press the stop (ª) key to stop recording. 5 To return to the starting point of the recording, press the key while pressing and holding the stop (ª) key. (This is the Last Recording Point (LRP) function.) To go to the beginning of the song (00:00:00:00), press the Ô key while pressing and holding the stop (ª) key. (This is the Return To Zero (RTZ) function) 6 Press the playback (Á) key to play the recorded TASCAM DP-004 59