TEAC DP-004 DP-004 Owners Manual (English) - Page 63
Setting the end point, appears and this position is set
View all TEAC DP-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
6-Basic Recording processed further or combined with other recordings (see "Exporting a stereo master" on page 100). NOTE Only one stereo master can be made in a song at a time. Setting the end point Before you start mastering, set the mastering end point. The time between the song's zero point (00: 00: 00: 00) and the OUT point will be recorded as the stereo master. Ordinarily, the end point of the song is set as the OUT point. In this case, the time at the OUT point is the length of the song. Use the following procedures to set the OUT (end) point. 1 Press the IN/OUT key to open the I/O SETTING screen. 2 Play the song back, and press the F4 (OUT) key at the position where you want the stereo master end point. "SET OUT!" appears and this position is set as the OUT point. TIP You can also set the OUT point when playback is stopped by pressing the F4 (OUT) key. 3 Press the HOME key to return to the Home Screen. NOTE For how to adjust the OUT point and for other functions, see "Setting IN and OUT points" on page 73. TASCAM DP-004 63