TEAC DP-004 DP-004 Owners Manual (English) - Page 66
Undoing operations (undo), Undoing the last operation (single undo)
View all TEAC DP-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
6-Basic Recording Undoing operations (undo) This unit allows you to undo an operation or recording that did not work as planned or was otherwise unsatisfactory. Undo can be used on many ordinary operations, including editing and recording operations. This unit has two types of undo functions. Single undo can be used with a simple key press, while multi-undo allows you to return to and undo a specific past operation. Undoing the last operation (single undo) Press the UN/REDO key to return to the state before the last operation was conducted. After doing this, the UN/REDO indicator lights, showing that redo (see below) is possible. NOTE The UN/REDO indicator lights when the unit state is not the last editing or recording operation conducted (when undo has been used). Cancelling an undo operation (redo) Press the UN/REDO key when it is lit to return to the 66 TASCAM DP-004 state of the last operation. The UN/REDO indicator turns OFF. NOTE If single undo is used when multi-undo (described below) has already been used to return the unit to a previous state, it will go one more step backward. If you press the UN/REDO key again to redo the step, the single undo operation is cancelled, and the previous multi-undo state is restored. In this case, the unit is not restored to the most recently conducted operation, so the UN/REDO indicator remains lit because further redo operations are possible. Undoing a previous operation (multi-undo) 1 Press the UN/REDO key while pressing and holding the stop (ª) key to open the HISTORY screen. This screen shows the operation history as a list. Each operation in the list is called an "event." The