TEAC DP-008 DP-008 Owner's Manual - Page 31
Preparations, Preparing the power and SD
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4 - Preparations Preparing the power and SD card Write-protected cards SD cards have write-protect (lock) switches. Installing an SD card 1 Make sure the unit power is OFF. Open the SD card slot on the right side of the unit. 2 Insert the SD Card into the slot as shown in the following illustration until it clicks into place. 3 Close the cover. Ejecting the card Push an inserted card in further to eject it. Unprotected Protected When the protect switch is in the LOCK position, files cannot be recorded or edited on the card. Slide the switch away from the LOCK position if you want to record, erase or otherwise changed files on a card. Preparing the power This unit can be powered either by AA batteries or a PS-P520 AC adaptor (sold separately). Alkaline or NiMH batteries can be used with this unit. Installing batteries Open the battery compartment on the bottom of the unit. Insert 4 AA batteries in the box according to the + and - indications. CAUTION Always turn the power OFF before removing the batteries or the SD card. Removing either while the power is still ON will cause any recordings and settings made since the last time the power was turned OFF or the song was saved to be lost. These data and settings cannot be recovered. CAUTION • The unit does not have charging ability. To use NiMH batteries, use an optional charger. • The included alkaline batteries are for confirming the operation of the unit and might not last very long. TASCAM DP-008 31