TEAC DP-008 DP-008 Owner's Manual - Page 47
Muting tracks, effect from each track.
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6 - Basic Recording TIME LEVEL 0.2 (0.8 for plate type) - 3.2 seconds (Default: 1.8 sec) 0 - 100 (Default: 80) Use TYPE to set the type of reverb. Use TIME to adjust the reverb time (depth). Use LEVEL to adjust the amount (volume) of the reverb. The signal after the reverb effect is applied (return signal) is mixed into the stereo signal. 3 After making the reverb settings, press the HOME key to return to the Home Screen. 4 Use the track REVERB knobs to adjust the amount of signal sent to the reverb effect from each track. Muting tracks 1 Press the EQ key and REVERB key at the same time to open the TRACK MUTE screen. 2 Press the REC key of a track to turn mute ON or OFF. When mute is ON, the track number is shown in inverse (dark number on light background). NOTE The reverb default values are as follows. TYPE Hall 1 Hall 2 Room Studio Plate 1 Plate 2 TIME 1.8 2.2 1.4 0.6 1.4 1.8 Default values LEVEL 80 80 10 20 60 60 When the setting value is the same as the default value, INI appears below the setting value. 3 After muting the tracks as desired, press the HOME key to return to the Home Screen. NOTE When mute is ON for a track, the track number is shown on the Home Screen in inverse (dark number on light background). Track mute ON indication TASCAM DP-008 47