Home » TEAC Manuals » Audio Mixers » TEAC DP-008 » Manual Viewer

TEAC DP-008 DP-008 Owner's Manual - Page 55

Fast forward/rewind search, Repeat playback, Setting IN and OUT points, Editing IN/OUT points

Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

7 - Recorder Functions TIP RTZ and LRP below the Ô and  keys are abbreviations for Return To Zero and Last Recording Position, respectively. Fast forward/rewind search Press the Ô or  key when stopped or during playback to rewind or fast forward, respectively. Each time you press one of these keys, the speed increases from 10x to 50x, 100x and 1000x. TIP You can also use the F3 and F4 keys to capture IN and OUT points when the Home Screen is open. [SET IN] Repeat playback Use the repeat playback function to play the same part again and again. The repeated passage is time between the IN and OUT points. Setting IN and OUT points In addition to using them for setting the repeat playback passage, the IN and OUT points are also used for interval setting for track editing. Moreover, the OUT point is used as the end point of the master track when mastering. Capturing IN and OUT points IN and OUT points can be captured when stopped, during playback or while recording. 1 Press the IN/OUT key to open the I/O SETTING screen. 2 Press the F3 (IN) key or F4 (OUT) key at desired position (regardless of whether the unit is stopped, playing or recording). "SET IN !" or "SET OUT !" and the captured time appear. [SET OUT] Editing IN/OUT points 1 When the I/O SETTING screen is open (see the first screen figure in the previous section), press the F2 (EDIT) key to open the edit screen. 2 Edit the values of IN and OUT points using the following guidelines. •• Use the F3 (§) and F4 (¶) keys to move the cursor between the IN and OUT points. •• Use the Ô/ keys to move the cursor between time fields. •• Turn the DATA wheel to change the value at the cursor position. 3 When finished editing, press the HOME key to return to the Home Screen. NOTE In the following cases, IN and OUT points cannot be captured or edited. TASCAM DP-008 55

Section	Page
Table of Contents	5
1-Introduction	7
Overview of this unit	7
About this manual	7
Manual conventions	7
Product parts	7
Intellectual property rights	8
About SD cards	8
Precautions for use	8
Cautions on installation	9
Beware of condensation	9
Cleaning the unit	9
2 - Quick Start Guides	10
Playback and mixing	10
Preparing to listen to the demo song	10
Playing and mixing the demo song	11
From recording to creating a master track	13
Creating a new song	37
Editing names	37
Loading a saved song	37
Creating a new song	37
Saving a song	38
Viewing song information	38
Copying songs	38
Erasing songs	39
Protecting songs	40
6 - Basic Recording	41
Selecting the input source	41
Phantom power	41
Monitoring input signals	42
About the OL indicators and level meters	42
Assigning inputs	43
Using input EQ	43
Making the first recording	44
Multitrack recording	45
REC indicator settings	45
Track pan and level settings	45
Input selection and assignment	45
Input level settings	45
Making additional recordings	45
Mixdown	45
Level and balance	45
Stereo position (panning)	45
Track EQ (equalizer)	45
Reverb	46
Muting tracks	47
Mastering	48
Setting the end point	48
Recording the master track	48
Undoing operations (undo)	49
Undoing the last operation (single undo)	50
Undoing a previous operation (multi-undo)	50
Erasing the operation history	51
7 - Recorder Functions	52
Punching in and out	52
Using the foot switch to punch in/out	52
Setting the foot switch polarity	52
Bouncing tracks	53
Using the bounce function	53
Confirming the result	53
Locate and search functions	54
Direct locate function	54
Return To Zero (RTZ) and Last Recording Position (LRP)	54
Fast forward/rewind search	55
Repeat playback	55
Setting IN and OUT points	55
Editing IN/OUT points	55
Using repeat playback	56
Setting the interval between repetitions	56
Locating to the IN or OUT point	56
Automatically punching in and out	56
Rehearsal	56
Using auto punch in/out to record	57
8 - Editing Tracks	58
Overview of track editing	58
Editing points	58
Basic editing procedures	58
Explanation of items	59
COPY/PASTE	60
COPY/INSERT	60
MOVE/PASTE	61
MOVE/INSERT	61
OPEN (insert silence)	61
CUT (remove part)	62
SILENCE (part erase)	62
CLONE track (track duplication)	62
CLEAN out (track erase)	63
9 - Miscellaneous Functions	64
Metronome	64
Tuner	64
Chromatic tuner mode	64
Oscillator mode	65
Turning the power off automatically	66
Restoring the initial preference settings	66
Viewing information	66
10 - SD Card Management	68
Overview of partitions	68
Formatting cards and setting partition sizes	68
Reformatting MTR partitions	69
Reformatting the FAT partition	70
Initializing SD cards	70
11 - Exchanging Data with a Computer	71
Supported operating systems	71
Connecting with a computer	71
Disconnecting	72
Song backup and restoration	73
Backing-up songs	73
Restoring songs	74
Track import and export	74
Importing tracks	75
Exporting tracks	76
Exporting a stereo master track	77
12 - Troubleshooting	78
13 - Messages	79
14 - Specifications and Block Diagram	81
Audio input/output ratings	81
Audio performance	81
General	81
Optional accessories	82
Computer requirements	82
Backup memory	82
Dimensions	83
Block diagram	83

Match case Limit results 1 per page

TASCAM

DP-008

TIP

RTZ and LRP below the

and



keys

are abbreviations for Return To Zero and

Last Recording Position, respectively.

Fast forward/rewind search

Press the



key when stopped

or during playback to rewind or fast

forward, respectively.

Each time you press one of these keys, the

speed increases from 10x to 50x, 100x and

1000x.

Repeat playback

Use the repeat playback function to play

the same part again and again.

The repeated passage is time between the

IN and OUT points.

Setting IN and OUT points

In addition to using them for setting the repeat

playback passage, the IN and OUT points are

also used for interval setting for track editing.

Moreover, the OUT point is used as the end

point of the master track when mastering.

Capturing IN and OUT points

IN and OUT points can be captured when

stopped, during playback or while recording.

1 Press the

IN/OUT

key to open the

I/O

SETTING

screen.

2 Press the

F3 (

)

key or

F4 (

OUT

)

key at

desired position (regardless of whether

the unit is stopped, playing or recording).

“

SET IN !

” or “

SET OUT !

” and the

captured time appear.

TIP

You can also use the F3 and F4 keys to

capture IN and OUT points when the Home

Screen is open.

[SET IN]

[SET OUT]

Editing IN/OUT points

1 When the

I/O SETTING

screen is open

(see the first screen figure in the previous

section), press the

F2 (

EDIT

)

key to open

the edit screen.

Edit the values of IN and OUT points

using the following guidelines.

Use the

•

(

) and

(

) keys to move

the cursor between the IN and OUT

points.

Use the

•



keys to move the cursor

between time fields.

Turn the

•

DATA

wheel to change the value

at the cursor position.

When finished editing, press the

HOME

key to return to the Home Screen.

NOTE

In the following cases, IN and OUT points

cannot be captured or edited.

7 – Recorder Functions