TEAC DP-008 DP-008 Owner's Manual - Page 66
Turning the power off automatically, Restoring the initial preference settings, Viewing information - firmware
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
9 - Miscellaneous Functions The default setting is 100. Use the F3 (§) and F4 (¶) keys to select parameters, and use the DATA wheel to set the parameter values. Use the F2 (ON) key to turn the output ON and OFF. Use the F1 (CHROM) key to change to chromatic tuner mode. 3 When you have finished tuning, press the HOME key to return to the Home Screen. MENU key to open the MENU screen. 2 Turn the DATA wheel to select PREFERENCE, and press the F4 (¥) key to open the PREFERENCE screen. 3 Use the F3 (§) and F4 (¶) keys to select Exec next to the Initialize item. Press F2 (EXEC) to open a confirmation screen. Turning the power off automatically You can set the time until the power automatically turns OFF after the last use when using the batteries. 1 When the recorder is stopped, press the MENU key to open the MENU screen. 2 Select PREFERENCE and press the F4 (¥) key to open the PREFERENCE screen. 3 Use the F3 (§) and F4 (¶) keys to select the Auto Off setting value, and turn the DATA wheel to choose from these options: OFF (initial setting, Auto Off does not occur), 3min, 5min, 10min, 30min 4 Press F3 (YES) to initialize the unit. The PREFERENCE screen reopens when the process finishes. NOTE Press the F4 (NO) key to cancel initialization. 5 When finished, press the HOME key to return to the Home Screen. 4 When finished making settings, press the HOME key to return to the Home Screen. Restoring the initial preference settings You can restore the PREFERENCE screen settings to their initial values (the values that they had when the unit was shipped from the factory). This operation is called initialization. 1 When the recorder is stopped, press the 66 TASCAM DP-008 Viewing information You can view information about the current song, the SD card and the firmware. 1 Press the MENU key to open the MENU screen. 2 Turn the DATA wheel to select INFORMATION and press the F4 (¥) key.