TEAC DP-008 DP-008 Owner's Manual - Page 9

Cautions on installation, Beware of condensation, Cleaning the unit - tascam /

Page 9 highlights

Cautions on installation •• The unit's nominal operating temperature is between 5˚ and 35° C (41° - 95° F). •• Do not install in the following types of places. Doing so could degrade the sound quality and/or cause malfunctions. •• Places with significant vibrations or that are otherwise unstable •• Near windows or other places exposed to direct sunlight •• Near heaters or other extremely hot places •• Extremely cold places •• Places with bad ventilation or high humidity Beware of condensation If the unit is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, let the Pocketstudio sit for one or two hours at the new room temperature before using. Cleaning the unit To clean the unit, wipe gently with a soft dry cloth. Do not use any benzene, paint thinner, ethyl alcohol or other chemical agents to clean the unit as they could damage the surface. 1 - Introduction TASCAM DP-008 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

TASCAM
DP-008
9
Cautions on installation
The unit’s nominal operating temperature
is between 5˚ and 35° C (41° – 95° F).
Do not install in the following types of
places. Doing so could degrade the sound
quality and/or cause malfunctions.
Places with significant vibrations or
that are otherwise unstable
Near windows or other places exposed
to direct sunlight
Near heaters or other extremely hot
places
Extremely cold places
Places with bad ventilation or high
humidity
Beware of condensation
If the unit is moved from a cold to a warm
place, or used after a sudden temperature
change, there is a danger of condensation;
vapor in the air could condense on the
internal mechanism, making correct operation
impossible. To prevent this, or if this occurs,
let the Pocketstudio sit for one or two hours at
the new room temperature before using.
Cleaning the unit
To clean the unit, wipe gently with a soft dry
cloth. Do not use any benzene, paint thinner,
ethyl alcohol or other chemical agents to clean
the unit as they could damage the surface.
1 – Introduction